Right Click here for downloads video

Automatic PET flake washing line(A)

Configuration

1.φ400×4.5M material input transporter, 3 KW electromotor.

2.φ2000×2000 steam heating washing tank,7.5 KW electromotor.

3.φ400×4.5M material output transporter, 4 KW electromotor.

4.φ400×1.5M single mixer floating trough, 4 KW electromotor.

5.φ400×3M material output transporter, 4 KW electromotor.

6.φ2000×2000 steam heating washing tank, 7.5 KW electromotor.

7.φ400×4.5M material output transporter, 4 KW electromotor.

8.φ400×3.5M frictional separator, 7.5 KW electromotor.

9.φ400×4M double mixer floating machine, 2×3KW electromotor.

10.φ400×4M double mixer floating machine, 2×3KW electromotor.

11.automatics spin-drier 7.5KW electromotor.

12.packing machine 3KW electromotor.

course: Dirty PET flakes through 1 be transport to 2,2 add caustic soda liquor stir in order to basically remove the dirt and oil (caustic soda rate 5%, wash 30 minutes). Then through 3 transport to 4 floating according to density of PP and paper <1 so on bottom. After that transport by 5 to 6 again, then through 7 to 8 separate conglutination. Then through 9.10 wash and wash again. Then put to 11 dehydrate finally be packing by 12.